CIRCUTOR CBS8 (Available until stocks) - Manual (Page 33)

----- Relay Station CBS-8 -------- --- Page No. 32
7.- SAFETY ADVICE
Installation guidelines given in the previous sections
INSTALLATION AND START UP, TYPES OF INSTALLATION and
TECHNICAL FEATURES must be followed.
When the equipment is connected the terminals are dangerous
when touched and opening covers or removing parts may give access to parts that
are dangerous when touched. This equipment is supplied in good working order.
8.- MAINTENANCE
The CBS-8 does not require any special maintenance. Any adjustment,
maintenance or repair on open equipment must be avoided as far as possible. If this
is unavoidable it must be undertaken by someone qualified and informed of the
necessary procedure.
Before any change to the connections, replacement, maintenance or repair
the equipment must be disconnected from the power supply. If any operating or
protection fault with the equipment is suspected, it must be taken out of service,
ensuring against any accidental connection. The equipment is designed to allow
parts to be quickly replaced in the event of any breakdown.
9.- TECHNICAL SERVICE
In the event of any operating queries or equipment breakdown please
contact our Technical Service:
CIRCUTOR S.A. – After sales service
Vial Sant Jordi, s/n
08232 - Viladecavalls
Tel. – (+34) 93 745 29 00 & fax – (+34) 93 745 29 14
E-mail: central @ circutor.es