CIRCUTOR CBS8 (Available until stocks) User Manual
Page 19
----- Relay Station CBS-8 -------- --- Page No. 18
4.4.- Setting mode
This mode allows the relay station to be configured.
To enter this mode, press the MODE and SELECT keys at the same time in
normal mode.
Whilst the equipment is in setting mode it continues
checking the line with the parameters in use before entering
setting
The earth leakage station has a protection system to prevent changes to the
configuration (“PROG” switch).
⇒ “PROG” switch
The working of this setting mode depends on the situation with this switch:
-
Up (blockable position): the CBS-8 enters setting mode although
changing the channel configuration parameters is not permitted.
-
Down: On entering setting mode all configuration parameters may be
changed.
⇒ Buttons
When in setting mode:
-
RESET button: Exits setting mode without making any changes.
-
MODE button: Changes the selected menu option.
-
SELECT button: Enters the selected option
-
MODE and SELECT buttons: returns the equipment to normal
operating mode with the new configuration.