CIRCUTOR CBS8 (Available until stocks) User Manual
Page 4
----- Relay Station CBS-8 -------- --- Page No. 3
1.- CHECKS ON RECEIPT
This manual assists in the installation and handling of the CBS-8 relay station to obtain
the best results from it. On receiving the equipment check the following:
a) The equipment is the same as the one you ordered.
b) Check that the equipment has not been damaged during delivery.
c) Check that it is supplied with the correct instruction manual.
d) CD with “EasyComm CBS-8” software
For safety reasons, it is vital that people installing or handling
the CBS-8 relay station follow the usual safety procedures as well
as the specific warnings contained in this instruction manual.
Check the following before connecting the equipment:
(a) Power supply voltage: see information on the side label.
Standard: 230 V AC. – Single phase, 50 ... 60 Hz
Other voltages: on request
(b) Maximum admissible current: according to toroid used (WG or WGP)