Junger Audio D*AP LM2 / D*AP LM4 - Digital Audio Processor - Manual (Page 45)

41
D*AP LM 4
Web GUI – EVENTS – Bypass Events
Bypass events – The final screen allows the configuration of event sequences that will happen in the case of
loss of input audio or selected forced bypassing of audio processing parameters.
The LM 4 has a dedicated <BYPASS> button on the front panel. The function of this button may be
configured in the upper section of the Bypass Events pane.
You may lock the button and you may also control it with the Processing Bypass check box :
The top two rows of check boxes represent the bypass switches of the individual function blocks of the
DSP. They may be used to force the bypass function of individual blocks manually.
If you turn the <BYPASS> button of the front panel ON the Processing Bypass check box will show it.
You may also use this check box to turn the front panel button ON / OFF and the pre-selected "follow"
function blocks will turn on the bypass mode.
In the lower rows you may configure the bypass function of the individual function blocks to be
controlled by an Bypass Events trigger :
The Event named "Bypass Event1" may be triggered by "Trigger 5". It will turn the bypass ON for the
function blocks: Expander, Compressor, and OFF for the Equalizer section.