Proceed CVP2 - Manual (Page 8)

8
Operating Voltage
& Frequency
The CVP2 is supplied with a “universal” power supply that will convert 100V-
250V AC power to the much smaller DC power that it requires. This power is
further filtered and regulated inside the unit itself.
Do not replace this external power supply with anything but an exact replace-
ment from Madrigal. Attempting to operate the CVP2 with an improper power
supply can damage the unit. Such damage would not be covered under the
warranty.
Warning: There are no user-serviceable parts within the unit. Please
refer any problems to an authorized Proceed service center.
The CVP2 can easily be powered by a normal 15-ampere AC mains line, as it
draws only a few watts of power. If other devices are also powered from the
same AC line, their additional power consumption should be taken into ac-
count.