Tempest Thunder User Manual
Page 34
Thunder Enclosure User Manual
page
34
Control Display
The display on the Control display provides additional status information, depending on the
operating mode:
Basic Mode &
28˚C 47%
internal temperature, relative humidity
Monitor Mode
209V OFF
line voltage, lamp status
DMX Mode &
28˚C 47%
internal temperature, relative humidity
Service Mode
209V OFF
line voltage, lamp status
Alternating with:
DMX: 001
DMX Start Address
No DMX
DMX Status
Control Interface Operation
The Control Interface is normally LOCKED.
To UNLOCK, hold ESC and OK together for 5 seconds.
You are now in the CONTROL MENU
Use to scroll up and down the menu.
Press OK to enter a menu item
Use to set the item parameter, or to scroll to the next menu level.
Use ESC to go BACK, and OK to confirm settings ( ).
To LOCK, hold ESC for 5 seconds.
Menu will time out after ten minutes.