Tempest Thunder - Manual (Page 37)

Thunder Enclosure User Manual page 37
f) Lamp Hours elapsed since last reset
g) Firmware version
RDM Monitoring and Configuration
All the features accessible over the DEC3.3 control panel are
also available over RDM. Just how this information is displayed
will depend on the RDM interface used. These screen shots
were taken running the GetSet program in Windows 7, and
connecting to a DEC3.3 controller using a RDM TRI MK1
interface, Tempest part # 2000.190
GetSet gives you a powerful RDM front end suite, with Tempest-specific functions and displays.
This view shows a single
DEC3.2 test unit that has been
correctly discovered and
labeled by the GetSet software
suite, and a log of RDM
messages.