Tempest Hurricane - Manual (Page 30)

Hurricane Enclosure User Manual page 30
10 Sample Specification
Unit shall be a Tempest Hurricane lighting enclosure catalog number 1000-__-__. The housing
shall be constructed from aluminum, fiberglass and stainless steel. Further, the unit shall
possess filtered forced air ventilation in combination with heater and controlled by a
microprocessor with a temperature display. Unit shall be designed to U.L. standard 508 for wet
locations and be a NEMA type 3R. The unit shall have above ground connection ports,
compression latches with padlock rings, and may be secured to its mounting via stainless steel
Unistrut members. Unit shall provide a power cutoff to fixture in case of high temperature inside
enclosure. Units shall control cool-down rate of projector by use of heater. Unit shall have a
projection window with optically clear safety glass. The enclosure shall be identified as The
Hurricane Enclosure manufactured by Tempest Lighting, Inc., of North Hollywood, California,
USA.