Tempest Hurricane - Manual (Page 41)

Hurricane Enclosure User Manual page 41
The threshold at which incoming air is more aggressively heated to remove
moisture. This parameter will not normally require adjustment.
DMX Set Range 001-510, Default 001
Sets the DMX address for the lamp relay control. In the DMX/RDM service mode,
the subsequent two DMX slots control fan and heater respectively.
Lamp Hours Default 0000
DEC3 counts the hours your projector/fixture lamp is on, and can report it both
on the user interface display and over RDM. Remember to reset to 0 when
changing lamps. This is provided to allow lamp hours monitoring on devices
such as Video Projectors and certain moving lights that have no native RDM or
DMX support.