wePresent WiPG-2000 - Manual (Page 12)

12
6
Quick Installation
1) Connect wePresent WiPG-2000 device to Projector/display through VGA/HDMI
port and turn on projector/display power.
2) Connect the power adaptor to WiPG-2000 device and press the power button to
turn on WiPG-2000 device. System will be ready when the LED light turns to blue.
It will show the default standby screen as below when system is ready.
3) Insert the speaker cable to WiPG-2000 audio jack for audio output
4) Insert the USB mouse or keyboard/AirPad or USB touch device to WiPG-2000
front/rear USB port for On-Screen Display (OSD) control. (Optional)