wePresent WiPG-2000 - Manual (Page 52)

52
10.3 Conference Control
1) Select “Conference Control” function, you can find the current connected user list
on this page. Please make sure the lock on the start page is disabled.
2) Enter password and then press [Login]. (default password: moderator)
3) After login, you can see a User List on the screen which indicates all of the users
connected to wePresent WiPG-2000 box.
4) The default setting is “allow control from this page only”. When this function is
checked, the moderator can control all the login users’ projection.