Adamson Point Series - Manual (Page 2)

It is compulsory to read this manual before using the Point Series system. Supervision and competency are
the responsibility of the system owners and operators. All welded intersections, joints and rigging hardware
must be inspected regularly. Operators must not assume rigging has been inspected prior to use.
Before assembling and suspending any
Adamson Point Series enclosures, the
rigger/ installer must carefully read the
Point Series operating manual and follow
safe rigging /installation instructions.
Please follow your country’s rigging safety
code and the venue’s recommendations
on hanging point loads.
Do not substitute with non Adamson
manufactured rigging parts.
Using a damaged or malfunctioning unit
or a unit with missing parts is strongly
unadvisable.
WARNING