Adamson Point Series User Manual
Page 6
Point Series User Manual Page 6 of 40
adamson
systems
.com
need to- and not where they don’t.
The Point Series also uses an innovative SLR™ rigging system, which allows individual
boxes to be pointed where they need to cover- irrespective of the positioning of other boxes
in the array. The SLR™ rigging system is highly adjustable, for precise results, using virtually
any Point Series box configuration, but is also very simple to adjust. SLR™brackets can be
“snapped” into place and then adjusted to almost any desirable coverage angle.
The look of an installation loudspeaker system is highly underrated, as installations
can be lost if the speaker system cannot blend into it’s surroundings. This is especially true
in many heritage buildings. That is why Adamson offers the Point Series in the entire range
of Pantone Color Systems, giving designers and contractors 1114 different color options to
perfectly match the speaker and SLR™ rigging accessories to the room.
All the Point Series boxes are made from 11ply 5/8” Baltic Birch for rock solid
construction and are shaped in anisometric hexagonal design to allow for use as a stage
monitor if necessary. They feature foam covered, powder coated steel grills.
In the interest in keeping costs down when budget is an issue, Adamson decided to
offer the Point Series in both Active and Passive versions.
Accurate prediction of the performance of loudspeakers in a permanent installation
is paramount to ensuring the right speaker is used for the job. This is why Adamson has released
EASE data for their entire Point Series range.
1.1
Design Considerations