AMETEK XT Series - Manual (Page 14)

Features and Specifications
Features
12 Operating Manual for XT Series Power Supply
Features
• The power supply delivers simultaneous digital displays for both voltage and
current, and bar graph displays for monitoring transient changes, which gives the
user the benefit of continuous, up-to-date information.
• Ten-turn voltage control permits high resolution setting of the output voltage.
• Current limit is fully adjustable from zero to the rated output with a single turn
control.
• The automatic crossover system allows the power supply to automatically
switch operating modes into current or voltage mode.
• Impedance-switched remote sensing lets operators display the voltage at the load
with no switch ambiguity.
• Multiple units can be connected in parallel or series to produce greater diversity.
• Short-circuit-proof power outlets give greater operating safety.
• These power supplies (available in single, dual, triple and quad outputs) can be
combined with one or more 300 watt series power supplies to create mixed units
that are ideal for high precision applications.
Options and Accessories
• Internal Analog Programming (APG) interface for analog signal control of
voltage and current, overvoltage protection (OVP), master/slave output tracking,
and remote ON/OFF.
• Internal RS-232 interface for serial instrument programming using RS-232
protocol.
• Internal GPIB interface for complete remote digital programming. IEEE-488
standard.
• Optional 200-250 Vac input (Options AC220, AC230 and AC240). Standard is
115 Vac. Optional AC input cords for use in different countries.
• Ten-turn current potentiometer (Option M11). Rack mount kit (Option RM).
• Locking voltage and/or current adjust knobs (Option M13A)
• Optional 115-230 Vac switching unit (Option M43)