AMETEK XT Series - Manual (Page 20)

Features and Specifications
Environmental Specifications
18 Operating Manual for XT Series Power Supply
Environmental Specifications
Mechanical Specifications
Maximum Remote Sense Line
Drop Compensation. (Line drop
must be deducted from the supply’s
maximum output voltage.)
0.5 V/line
Operating Ambient Temperature 0 to 30 °C with default local sensing. Above
30 °C, derate output linearly to 0 at 70 °C.
Storage Temperature Range –55° to 85 °C
Humidity Range Up to 80% RH non-condensing
Operating Altitude Up to 6,500 feet (2000 m)
Storage Altitude Up to 50,000 feet (15 000 m)
Front Panel Voltage and Current
Control
10-turn voltage and 1-turn current
potentiometers (10-turn current control
optional)
Front Panel Voltage Control
Resolution
0.02% of maximum voltage
Front Panel AC Input Power Switch Push ON/push OFF switch
Front Panel Voltage and Current
Meters
Independent 3-digit green numeric LED
display and analog bar graph displays for
current and voltage. For meter accuracy, see
Table 1.2 .
AC Input Connector Type IEC 320 Connector, appropriate power cord for
destination country.
Front Panel Output Connector Three binding posts: positive (+),
negative (–), and ground.
Rear Panel Output and Sense
Connector
Four terminal block.
Chassis Ground Front panel binding post and power cord safety
ground.
Cooling Convection cooled. Air enters the unit from the
bottom and lower sides and exits from the
upper sides and top.
Mounting Optional rack for mounting several units in a
standard rack. Can be combined with 300 watt
series units. See “Rack Mounting” on page 24 .