Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide - Manual (Page 19)

19
PROGRAMMER'S GUIDE FOR v02.00.46
3.2.4 Example of memorized preset recall
Picture 10 : Example of memorized preset recall
3.2.5 Continue with a TAKE action (automatically)
If you want to launch a “TAKE” action after loading a preset, you can simply replace the PMloa
command described above by the command PMlot (PEMEM_LOAD_AND_TAKE). This ‘macro’ action will
automatically load a preset from the Memory, launch a “TAKE” action then wait for the end of the
operation.
Syntax : 1PMlot
L
F
Only value 1 is allowed, machine will immediately acknowledge the command.
The end of the action is signaled by answering the PMlot command with value 0 (meaning that the “TAKE”
operation has been completed successfully).
Important : Before using the PMlot command, you need to set parameters like memory number,
destination screen, filters, options (see in
§Detailed commands sequence section above for more
information).