Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide - Manual (Page 23)

23
PROGRAMMER'S GUIDE FOR v02.00.46
Important : Before using the PSlot command, you need to set parameters like memory number,
destination screen, filters, options (see in
§Detailed commands sequence section above for more
information).
3.4 Changing the source displayed in a layer
3.4.1 Usage
Picture 13 : Changing layer source - Web RCS
The “Layer Source change” action allows
changing the source displayed in a layer of a screen,
on the Program or Preview output. Source type can
be “live sources”, frames, logos or color.
3.4.2 LiveCore™ layers reminder
Pictures are displayed on a screen in overlapping layers. Each layer can contain a predefined picture of
any type, “Frame”, live input or “Logo”, independently on the layer depth.
The first layer is the lowest, it can be covered by any upper layer.
3.4.3 Detailed commands sequence

Provided parameters are Screen, ProgPrev, Layer and Source number :
Syntax : <scrn>,<ProgPrev>,<layr>,<src> SPPEi L
F
<scrn> is the Web RCS screen number minus 1.
<ProgPrev> is 0 for Program, 1 for Preview.
<layr> is a value representing the destination Layer. (0 for Layer A, 1 for B, 2 for C and 3 for D)
<src> is a value representing the input source : see detailed command chapter for legal values.
3.4.4 Example of Preview layer source change sequence
Picture 14 : Example of Preview layer source change