Argox PT-60 - Manual (Page 30)

User’s Manual 25
3.5.2 Saving Battery Power
Automatic shut-down of the PT-60
The PT-60 enters idle mode when there is no task or if all tasks are waiting for input. In
default setting, the PT-60 automatically turns itself off if idle for 3 minutes and when there is
no external charging power. Press the power button to return the PT-60 to the same point at
the time of automatic shutdown.
In Power Properties, select “Schemes”. Customize automatic shut off time by tapping the
arrow to select from a list of time periods. The available time periods are 1, 2, 3, 4, 5, 10, 30
minutes and never.
Activate this function when the PT-60 is plugged into the power adapter or placed in its cradle
by tapping the check box and then tapping the arrow to select from a list of time periods. The
available time periods are 1, 2, 3, 4, 5, 10, 30 minutes and never.
Figure 3-8 Power Properties
Backlight Setting
Because the power consumption of the LCD backlight is high, turn off the backlight function
when it is not necessary. If a backlight is required, set “automatically turn off the back-light.”
To change the backlight setting, select Settings / Control Panel from the Start menu, and then
double tap the “Timeout & Brightness” icon.
Figure 3-9 Backlight Setting