Argox PT-60 - Manual (Page 86)

User’s Manual 81
Mobile computer will not shut off

If the mobile computer is processing data, attach a charging cable to insure the battery
isn’t depleted.

If the mobile computer is connected to AC power, disconnect.
3.6.1 Perform a warm boot – WARNING – Unsaved data will be lost.
3.6.2 Perform a cold boot – WARNING – The mobile computer is reset to default settings
and data will be lost
Screen is blank
3.5.5 Make sure mobile computer is powered on.
3.6.3 Adjust screen brightness.
Mobile computer either doesn’t respond, or responds inaccurately to touch screen input
3.7.4 Calibrate touch screen.
3.6.1 Perform a warm boot – WARNING – Unsaved data will be lost.
3.6.2 Perform a cold boot – WARNING – The mobile computer is reset to default settings
and data will be lost
Battery life is short
7.6 Adjust “Power Properties” especially if peripherals are used.
7.5.3 Adjust backlight of LCD or keypad.
8.4 Replace battery pack if old (battery can be recharged approximately 500 cycles.)
“Low Backup Battery” message
8.3.23 Charge mobile computer for 10 hours