Argox PT-60 - Manual (Page 76)

User’s Manual 71
8.3.12 Password
You can set a password to keep unauthorized users from using the PT-60.
Figure 8-16 Password Properties
To set up a password:
1. Select the password setting tab.
2. Enter the password in the password box.
3. Re-enter the password in the password confirmation box.
4. To enable the password protection when the system starts, click the “Use Password for
While System starts” check box.
If you touch the screen with a stylus pen to input the password in the initial screen, a keyboard
appears. After keying in the password, press enter on the keyboard to go to the main screen.
You may encounter a request to enter the password again on the initial screen if you have
turned off the PT-60’s power after activating password or have done a software reset. If you
forget the password and cannot boot the system you may have to do a hardware reset. A
hardware reset erases all files, data, as well as programs. Please consider using a password that
is easy to remember and leave a record easy to access. To deactivate a password, delete the
password in the password feature window.