Argox PT-60 - Manual (Page 84)

User’s Manual 79
Sound
To set the sound:
1. Select go to Start → Setting → Control Panel.
2. Open volume and sound icons and select volume tab.
3. Select an event from the event list.
4. Select a sound from the event sound list.
5. To remove the sound from the selected event, choose (None).
6. To save the changes in another scheme, select save in another name and name the sound
scheme.
7. To remove the sound scheme, select the scheme and then Delete.
Figure 8-24-1 Volume & Sounds Figure 8-24-2 Volume & Sounds