Avalon Firestyles 864 See-Thru GS2 Installation - Manual (Page 36)

36 Installation
(for qualified installers only)
© Travis Industries 4141208 100-01404
Thin Facing Installation (tile, marble, or other non-combustible under 1" (25mm) thick)
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Do not install tile (or other material)
in front of the glass frame,
convection channel, or access panel
openings. This area must remain
open to access internal components
and for convection air.
Raised Fireplaces:
Facing is installed 1" (25mm)
maximum above the base of the
fireplace.
Facing is installed to this
edge of the fireplace.
FRONT VIEW
Tile Line
Tile Line
Hearth Line
Tile Line
34-1/4"
870mm
1" (25mm)
2" (51mm) 37"
940mm
1-1/8"
29mm
NOTE FOR FPX FACES:
FPX arched faces require the FPX Face
Upgrade Kit (sku 98500686) and a
triangular piece of facing in these upper
corners. See the instructions included
with the face for further details.
7-7/8" (200mm)
2-7/8"
(73mm)
Fireplace
Drywall
Framing
Nailing Bracket
Tile
TOP VIEW
Drywall
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (25mm) maximum above the
base of the fireplace. The fireplace may be raised to
accommodate thicker hearth materials.