Avalon Firestyles 864 See-Thru GS2 Installation - Manual (Page 77)

Optional Equipment
(for qualified installers only)
77
© Travis Industries 4141208 100-01404
20. Route the battery box harness through the control panel and attach to the battery box.
21. Place the IFC in location inside the heater and attach using the applied velcro tape.
22. Re-connect the ground wire.
23. Use the two included cable ties to make sure all wiring is secure and does not contact any hot or
moving parts.
24. Attach the control panel.
25. Attach the battery box to the control panel using the screws removed in step 2.
26. Re-connect the input power input.
27. Restore the fireplace to the correct configuratio (turn power and gas on).
See the instructions included with the remote for synchronizing the
remote and operating instructions.