Log set, Installation, Log set and coal installation – Avalon Firestyles Salish-1999 to 2000 User Manual

Page 17

Advertising
background image

Installation

(for qualified installers only)

17

Travis Industries

9 3 5 0 8 1 0 7

1 0 0 2 0 1

Log Set and Coal Installation

Place the strips on the
grate as shown in this

illustration. The front
strip should hang half

way over the burner.

Grate

Place the log set on the

grate. Position the logs
so the rear corners rest

against the log stops.

Place the optional kibbles
in front of the firebox. Do

not place the kibbles directly
over the burner holes.

Side View

One Strip Approximately

7-1/2Ó by 1-1/2Ó

Two Strips Approximately

3Ó by 1-1/2Ó

Preparing the Glowing Embers:

The glowing embers come in a single
strip. Stretch them as thin as possible

(nearly transparent) to form three strips
of the following sizes:

There may be extra material -

save it for future use.

Tuck the front of the ember strip down,

behind the burner with a screwdriver. Make
sure the mat of ember wool is not over the

burner holes. Tuck it behind the burner
tube if necessary.

Note how only a few

ÒwhiskersÓ are over
the burner holes.

Advertising