Paxar Monarch 9855 RFID Printer User Manual
Page 32
To exit an option without changing the setting, press
Escape/Clear.
S u p p l y Ty p e
RFID supplies are only die cut. Refer to the 9855 Operator’s
Handbook for additional supply type information if using non-RFID
supplies in your RFID printer.
To change the setting, from the Main Menu, select Setup, then
Supply. If password protection in enabled, press Feed/Cut three
times, then press Enter/Pause before you see the Setup Menu
options. Then, follow these steps.
1. Press
l or r until you see
SUPPLY
l
Supply Type
r
2. Press Enter/Pause to set the supply type option. The current
setting is displayed, for example:
SUPPLY TYPE
l
Die Cut
r
3. Press
l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main Menu.
4-2 Setting Supply Options