Paxar Monarch 9855 RFID Printer - Manual (Page 43)

3. Press l or r to change the dispense position. Pressing l
decreases the value; r increases it.
4. Press Enter/Pause when the number you need appears.
Press Escape/Clear until you see the Main menu.
B a t c h S e p a r a t o r s
A batch separator is an extra tag printed in between batches with
a pinstripe pattern. If you select "Long" for the separator, a
double-length (two tags) separator prints. The name of the batch
is shown on the batch separator.
Since this feature unnecessarily wastes a label, we do not
recommend using batch separators with RFID labels.
Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l
Separators
r
Batch Separator
Setting Supply Options 4-13