Paxar Monarch 9855 RFID Printer - Manual (Page 81)

An optional keyboard is also available to enter offline batch data.
The keyboard must be purchased separately. If there are offline
batches in the print queue, the offline batches print after the
downloaded batches have printed.
O n - D e m a n d M o d e P r i n t i n g
When this printer is operating in the on-demand mode, the next
label prints when the previous label is removed from the printer or
when Feed/Cut is pressed. The display shows "Printing X of Y"
until all the labels in the batch are printed.
If you have purchased the optional peel module, you must use
on-demand printing with peel mode. If you are using peel mode,
remove the excess backing paper by pulling up across the
saw-toothed tear edge. Make sure the backing paper tears at the
edge. Hold the leading edge of peeled labels when printing on
stock longer than six inches. The minimum feed length for peel
mode is 1.5 inches. You must use non-perforated supplies for
peel mode. The maximum speed for peel mode is 8.0 ips.
We recommend using 0.5-inch gap supplies in
peel mode when backfeed is disabled.
P r i n t i n g a n E r r o r L a b e l
If the printer displays a data error (errors
0-499), press Feed to print an error label
and continue printing. See your System
Administrator about the error label.
Printing 8-3