Paxar Monarch 9855 RFID Printer - Manual (Page 33)

R i b b o n
You have to tell the printer if your supplies require a ribbon. To
change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
Ribbon
r
2. Press Enter/Pause to set the ribbon option. The current
setting is displayed, for example:
RIBBON
l
Yes
r
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main Menu.
If you set the Ribbon option to Yes, install a
ribbon before printing.
Setting Supply Options 4-3