Paxar Monarch 9855 RFID Printer - Manual (Page 89)

C A R E A N D M A I N T E N A N C E
9
This chapter tells you how to
◆ clear label jams and clean the printer
◆ replace a printhead.
CAUTION
Do not use sharp objects to clean the printhead or
touch the printhead with your fingers. This may
damage the printer and require a service charge.
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, the Fault light on the
printer’s front panel blinks. To clear the jam:
1. Turn off the printer and open the cover and printhead assembly.
2. If necessary, remove the label roll and ribbon.
3. Remove the jammed labels and reload the label roll.
4. Close the printhead assembly and turn on the printer.
5. Press Feed/Cut to position the supply under the printhead.
C l e a n i n g
The rate and frequency at which you print determines how often
you must clean the printer.
You must clean the printhead as described to maintain
printhead life.
Care and Maintenance 9-1