Paxar Monarch 9855 RFID Printer - Manual (Page 64)

S e t t i n g B a t c h O p t i o n s
You can select Batch Options to change which prompts appear
during Batch Entry mode and set default values for those
prompts. Customizing which prompts appear during batch entry
can reduce the time it takes to enter data for a format. If the
optional knife is not installed, you can prevent those prompts from
appearing during batch entry mode. If you set a new default
value for an option, that value is used even if the prompt is not
displayed. If you do not change a default value for an option, the
system default is used if the prompt is not displayed.
Setting batch options requires the optional
keypad, which must be purchased separately.
Refer to your keyboard’s Operating Instructions for more
information.
S e t t i n g u p t h e N e t w o r k P r i n t e r
Your System Administrator should refer to the MonarchNet2

Operating Instructions (available on our Web site) for more
information about your wired and wireless printer.
S e t t i n g u p t h e R F I D P r i n t e r
Your System Administrator should refer to the RFID Application
Notes (available on our Web site) for more information about
setting up your RFID printer.
5-14 Setting Defaults