Paxar Monarch 9855 RFID Printer - Manual (Page 41)

To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Then, follow these steps.
1. Press l or r until you see
POSITIONING
l
Margin Pos
r
2. Press Enter/Pause. The current setting is displayed, for
example:
Enter margin pos
[-99/99]: +0
3. Press l or r to change the margin position. Pressing l
decreases the value (moves the image toward the left side of
the supply);
r increases it (moves the image toward the right
side of the supply).
4. Press Enter/Pause when the number you need appears.
Press Escape/Clear until you see the Main Menu.
C u t P o s i t i o n
This function adjusts where the tag is cut. It is not available with
RFID.
D i s p e n s e P o s i t i o n
This function adjusts the stopping point of the label.
To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Follow these steps.
1. Press l or r until you see
POSITIONING
l
Dispense Pos
r
Setting Supply Options 4-11