Becker TRAFFIC ASSIST 7914 - Manual (Page 42)

42
1DYLJDWLRQDO PRGH
1DYLJDWLRQ PHQX 5RXWH SODQ
QLQJ
The route planning menu allows you to
create and select individual routes. In
addition to selecting and setting a wide
range of details, you can also define legs
of the journey.
X In
1DYLJDWLRQ PHQX, press the 5RXWH
SODQQLQJ key to access the route menu.
In the route menu, you will see the
map symbol in the top right. The last
route used is shown in the top left. The
individual legs of this route can be seen
underneath.
X Routes already saved can be selected
by pressing the top button
5RXWH.
6FUROOLQJ WKURXJK WKH OLVW RI URXWHV
X Press the arrow keys on the
right hand side of the screen to scroll
through the list of routes.
Every entry in the list of routes has
a screen with three buttons. Once the
route has been selected, either an info
display is shown or you can rename or
delete the route.
The following function keys are also
available:
7KH 1HZ URXWHNH\
The
1HZ URXWH key can be used to set a
personal route.
X Press the
1HZ URXWH key.
The destination selection window opens
(see also page 34).
X Select the type of destination selection.
X Enter the address you want.
X If you also want to record the destina-
tion entered in the destinations memory,
select
6DYH.
X To transfer the destination to the route
planning window, select
$GG.
X Repeat these entries from the route
planning window using the
,QVHUW key.
6002
6013
.H\ 0HDQLQJ
New route Opens the "address win-
dow" for entering a new
destination address
Edit Activates individual
route points for process-
ing
6013
7006
Calculate Calculates the differ-
ence in distance and the
journey time for the cur-
rent entries
Start Starts navigation
6004