Bolide SVR8000s User Manual
Page 19
SVR-8000S User’s Manual
19
password and confirm the password in the given fields.
5.
Click the Next button. This will take you to the HDD Management window, shown in Figure 4.
Figure 4. HDD Management
6.
To start HDD management, click the Enter button.
7.
If a new HDD was recently installed, select the HDD from the list to initialize it. Initializing the HDD
will format and remove all data from it.
8.
After the HDD has been initialized, click the OK button which will take you back to the Setup Wizard
window.
9.
Click the Next button. This will take you to the Record Settings window, as shown in Figure 5.
Figure 5. Record Settings
10. To enter the Record Settings window, click the Enter button.
11.
Select the Schedule tab, shown in Figure 6.