BUG-O Systems SE-4PTD - Manual (Page 22)

22
SET % SPEED, FRACTION OF SET SPEED: TYPE 6, QUADRANT 4
Selecting Type 6-4 allows the speed to change to a fraction of the set speed. Display will read
“Speed %”, and data entry is accepted from 1 to 99. Entering 0 or just Return will make the speed
100%, which is the same as set speed.
When the program reaches a Type 6-3 segment while running, the speed will change to the per-
cent entered, and continue at this setting until there is a later Type 6-3 segment which changed it to
another % setting or back to 100%.
Note: If Type 6-3 has been set for HI (rapid traverse), then this setting will cut down the HI speed to
the same %.
Settings below 10% are not recommended.