ConnectGear WA660N - Manual (Page 47)

40
2-5 WPS Setting
Wi-Fi Protected Setup (WPS) is the simplest way to build connection
between wireless network clients and this access point. You don’t have to
select encryption mode and input a long encryption passphrase every time
when you need to setup a wireless client, you only have to press a button
on wireless client and this access point, and the WPS will do the setup for
you.
This access point supports two types of WPS: Push-Button Configuration
(PBC), and PIN code. If you want to use PBC, you have to switch this
access point to WPS mode and push a specific button on the wireless
client to start WPS mode. You can push Reset/WPS button of this access
point, or click ‘Start PBC’ button in the web configuration interface to do
this; if you want to use PIN code, you have to provide the PIN code of the
wireless client you wish to connect to this access point and then switch
the wireless client to WPS mode. The detailed instructions are listed
follow:
To use WPS function to set encrypted connection between this access
point and WPS-enabled wireless client by WPS, click ‘WPS Setting’ on
the left of web management menu, and the following information will be
displayed:
Note: WPS function of this access point will not work for those
wireless clients do not support WPS.