ConnectGear WA660N - Manual (Page 69)

62
2-10 System Utilities
This access point provides some control functions include password, IP
address management, and DHCP server function. Please click ‘System
Utility’ on the left of web management interface to access these functions.
Below are detailed descriptions of every control function.
2-10-1 Change Password
You can change the password used to enter the web configuration menu
of this wireless access point.
Please click ‘System Utility’ on the left, and the following message will
be displayed:
Please input current password in ‘Current Password’ field, then input new
password in both ‘New Password’ and ‘Re-Enter Password’ field. After
you finish, please go to the bottom of this page and click ‘Apply’, and the
following message will be displayed:
When you see this message, the settings you made is successfully save.
You can click ‘Continue’ button to back to previous page and continue on
other setting items, or click ‘Apply’ button to restart the wireless access
point and the changes will take effect after about 30 seconds.