ConnectGear WA660N User Manual
Page 76
69
3-3 System Reset
When you think the access point is not working properly, you can use this
function to restart the access point; this may help and solve the problem.
This function is useful when the access point is far from you or
unreachable. However, if the access point is not responding, you may
have to switch it off by unplug the power plug and plug it back again
after 10 seconds.
To reset your access point, please click ‘Reset’ on the left, and the
following message will be displayed:
Please click ‘Apply’, and a popup message will ask you again, to make
sure you really want to reset the access point:
Click ‘OK’ to reset the access point, or click ‘Cancel’ to abort. Please
remember all connections between wireless client and this access point
will be disconnected.