ConnectGear WA660N User Manual
Page 75
68
3-2 Firmware Upgrade
If there are new firmware of this wireless access point available, you can
upload the firmware to the access point to change the firmware with new
one, to get extra functions or problem fix.
To perform firmware upgrade, please click ‘Upgrade’ on the left of web
management interface, and the following message will be displayed:
Click ‘Browse’ button first, you’ll be prompted to provide the filename of
firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your access point.
After a firmware upgrade file is selected, click ‘Apply’ button, and the
access point will start firmware upgrade procedure automatically. The
procedure may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web
browser or physically disconnect your computer from access point. If
the firmware you uploaded is corrupt, the firmware upgrade will fail,
and you may have to return this access point to the dealer of
purchase to ask for help. (Warranty voids if you interrupted the
upgrade procedure).