ConnectGear WA660N - Manual (Page 70)

63
2-10-2 IP Address of the Wireless Access Point
You can change the IP address of this wireless access point, so it can
become a part of your local network. Please remember this address or you
will not be able to connect the configuration menu of this wireless access
point.
Default IP address is: 192.168.2.1 / Subnet Mask 255.255.255.0, you can
press and hold ‘Reset/WPS’ button over 10 seconds to change the IP
address back to default value if you forget the IP address you set.
To change IP address, please click ‘System Utility’ on the left, and the
following message will be displayed:
Please input IP address and Subnet Mask in corresponding field, and you
can input the IP address of gateway in ‘Gateway Address’ field, if you
need to manage this wireless access point from other network (like
Internet).
If you want to activate the DHCP server function of this wireless access
point, please select ‘Enabled’ in ‘DHCP Server’ option, and see next
Section for detailed instructions; if you don’t want to use DHCP server
function of this wireless access point, or there’s another DHCP server on
the network this access point connects to, please select ‘Disable’.