Cybex 425A Arc Trainer - Manual (Page 9)

Safety
Page 1-1
1 - Safety
Important Voltage Information
IMPORTANT: Read all instructions and warnings before using the unit.
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your
area match the voltage of the unit that you have received. The power requirements for the unit include a
grounded circuit, rated for one of the following: 115 VAC 5%, 50/60 Hz and 15 amps; or 230 VAC
10%, 50/60 HZ and 10 amps. See the voltage requirement decal for the exact voltage requirements of
your unit.
WARNING: Do not attempt to use this unit with a voltage adapter. Do not attempt to use this
unit with an extension cord.
+_
+_
Grounding Instructions
This unit must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
AW-19624 AW-19625 AW-19626
115 VAC 230 VAC 230 VAC
AW-19627
100 VAC
DANGER: Improper connection of
the equipment grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
provider if you are in doubt as to whether
the unit is properly grounded. Seek a qual-
ified electrician to perform any
modifications to the cord or plug. Cybex is
not responsible for injuries or damages as
a result of cord or plug modification.
This unit is for use on a nominal 115 VAC
5%, 50/60 Hz and 15 amps; or 230 VAC
10%, 50/60 Hz and 10 amps and a grounded
circuit. Make sure that the unit is connected
to an outlet having the same configuration as
the plug. Do not use a ground plug adapter
to adapt the power cord to a non-grounded
outlet.
+_
+_
Cybex Arc Trainer 425A Owner’s Manual