DFI EC700-BT Manual - Manual (Page 36)

www.dfi .com
36
Chapter 7 BIOS Setup
Chapter 7
Main
The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.
System Date
The date format is <day>, <month>, <date>, <year>. Day displays a day, from Sun-
day to Saturday. Month displays the month, from January to December. Date displays
the date, from 1 to 31. Year displays the year, from 1980 to 2099.
System Time
The time format is <hour>, <minute>, <second>. The time is based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00. Hour displays hours from 00 to
23. Minute displays minutes from 00 to 59. Second displays seconds from 00 to 59.
AMI BIOS Setup Utility
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Save & Exit Chipset
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
BIOS Information
BIOS Vendor
Project Version
Build Date and Time
CPU Confi guration
Microcode Patch
BayTrail SoC
System Date
System Time
Access Level
American Megatrends
BT253 0.11 x64
11/26/2014 10:05:50
902
Do Stepping
[Thu 08 /01/2015]
[16:19:21]
Administraor
Advanced Boot Security Main
Set the Date. Use Tab
to switch between Date
elements.
Advanced
The Advanced menu allows you to configure your system for basic operation. Some entries are
defaults required by the system board, while others, if enabled, will improve the performance
of your system or let you set some features according to your preference.
Important:
Setting incorrect field values may cause the system to malfunction.
Windows 8.X or Windows 7
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
OS Selection [Windows 7]
SCC eMMC Support [Enable eMMC Support]
 Trusted Computing
 NCT6106D Super IO Confi guration
 HW Monitor
 CPU Confi guration
 SATA Confi guration
 Network Stack Confi guration
 CSM Confi guration
 USB Confi guration
 Security Confi guration
 Intel(R) I210 Gigabit Network Connection - 00:01:29:51......
 Intel(R) I210 Gigabit Network Connection - 00:01:29:51......
Save & Exit Chipset Boot Security Main Advanced
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
OS Selection
Select the OS support: Windows 8.X or Windows 7.
SCC eMMC Support
Enable or disable the SCC eMMC support.