DFI EC700-BT Manual - Manual (Page 45)

www.dfi .com
45
Chapter 7 BIOS Setup
Chapter 7
NIC Configuration
This field is used to configure the network device.
Specifi es the port speed
used for the selected
boot protocol.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Link Speed
Wake on LAN
Advanced
[Auto Negotiated]
[Disabled]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
Link Speed
Specify the port speed which is used for the selected boot protocol.
Wake on LAN
Enable the server to be powered on using an in-band magic packet.
Intel(R) I210 Gigabit Network Connection - 00:01:29:51...
This section is used to configure the parameters of Gigabit Ethernet device.
Confi gure Boot Protocol,
Wake on LAN, Link
Speed, and VLAN.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
PORT CONFIGURATION MENU
 NIC Confi guration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type
PCI Device ID
Bus: Device: Function:
Link Status
MAC Address
Virtual MAC Address
Advanced
0
Intel(R) PRO/1000 5.5.19
001300-000
Intel i210
1533
02:00:00
[Disconnected]
00:01:29:51:00:00
00:01:29:51:00:00
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F4: Save & Reset
ESC: Exit
Blink LEDs
Identify the physical network port by blinking the associated LED.
Link Status
This field indicates the link status of the network device.
Virtual MAC Address
This field indicates programmatically assignable MAC address for the network port.