DFI ML905-B11C/B16C - Manual (Page 48)

48
3
BIOS Setup
PnP/PCI Configurations
This section shows how to configure the PCI bus system. It covers some very
technical items and it is strongly recommended that only experienced users
should make any changes to the default settings.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically configure all of
the boot and Plug and Play compatible devices.
Auto(ESCD)
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ resources in the “IRQ Resources” field.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
** PCI Express Relative Items **
Maximum Payload Size
[Auto (ESCD)]
Press Enter
[Disabled]
[128]
The settings on the screen are for reference only. Your version may not be identical to
this one.