DFI ML905-B11C/B16C - Manual (Page 49)

49
3
BIOS Setup
IRQ Resources
Move the cursor to this field and press <Enter>. Set each system interrupt to
either PCI Device or Reserved.
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can work with PCI/
VGA or not. The default value is Disabled.
Enabled
MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled
MPEG ISA/VESA VGA cards does not work with PCI/VGA.
Maximum Payload Size
This field is used to select the maximum TLP payload size of the PCI Express de-
vices. The unit is byte.
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Legacy ISA for
devices compliant with
the original PC AT bus
specification. PCI/ISA
PnP for devices compli-
ant with the Plug and
Play standard whether
designed for PCI or ISA
bus architecture.
The settings on the screen are for reference only. Your version may not be identical to
this one.