Chapter 4 – DFI HM960-HM86 User Manual

Page 37

Advertising
background image

www.dfi .com

Chapter 4 BIOS Setup

37

Chapter 4

PC Health Status

This section displays hardware health monitor.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

System Hardware Monitor

CPU Smart Fan

CPU Temperature
CPU FAN Speed
VCore
DDR
+1.05V

Advanced

[Enabled]

: +36 C
: 4482 RPM
: +1.785 V
: +1.334 V
: +1.052 V



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save and Reset
ESC: Exit

Enable/ Disable CPU
SmartFan

CPU Configuration

This section is used to configure the CPU. It will also display the detection of CPU information.

Hyper-threading

Enable this field for Windows XP and Linux which are optimized for Hyper-Threading

technology. Select disabled for other OSes not optimized for Hyper-Threading technol-

ogy. When disabled, only one thread per enabled core is enabled.

Active Processor Cores

Number of cores to enable in each processor package.

Limit CPUID Maximum

The CPUID instruction of some newer CPUs will return a value greater than 3. The

default is Disabled because this problem does not exist in the Windows series operat-

ing systems. If you are using an operating system other than Windows, this problem

may occur. To avoid this problem, enable this field to limit the return value to 3 or less

than 3

.

EIST

This field is used to enable or disable the Intel Enhanced SpeedStep Technology.

Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
Technology) and Disabled
for other OS (OS not
optimized for
Hyper-Threading
Technology). When
Disabled only one thread
per enabled core is
enabled.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Advanced



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save and Reset
ESC: Exit

Genuine Intel(R) CPU 0000 @ 2.00GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-X Technology
Intel SMX Technology
64-bit
EIST Technology
CPU C3 State
CPU C6 State
CPU C7 State

L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache

Hyper-threading

Active Processor Cores
Limit CPUID Maximum
EIST
Turbo Mode
Intel TXT (LT) Support

306c2
ffff0006
2000 MHz
800 MHz
2000 MHz
4
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported

32 KB x4
32 KB x4
256 KB x4
6144 KB

[Enabled]

[All]
[Disabled]
[Enabled]
[Enabled]
[Enabled]

CPU Smart Fan

Enable or disable the CPU smart fan.

Advertising
This manual is related to the following products: