Chapter 2, Mic-in jack, Bios setting – DFI CD952 series User Manual
Page 14: Driver installation, Rj45 lan ports
www.dfi .com
14
Chapter 2 Hardware Installation
Chapter 2
Mic-in jack
This jack is used to connect an external microphone.
BIOS Setting
Configure the onboard audio in the Chipset menu (“South Bridge” submenu) of the BIOS.
Refer to chapter 3 for more information.
Driver Installation
Install the audio driver. Refer to chapter 4 for more information.
VGA
1
VGA
/
DVI-I
Mic-in
VGA
1
VGA
/
DVI-I
RJ45 LAN Ports
LAN 1 LAN 2
Features
• 2
Intel
®
WG82574L Gigabit Ethernet LAN controllers
The LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN in the Chipset menu (“South Bridge Configuration” submenu) of
the BIOS. Refer to chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to chapter 4 for more information.