DFI CD952 series - Manual (Page 16)

www.dfi .com
16
Chapter 2 Hardware Installation
Chapter 2
VGA Port
VGA
1
VGA
/
DVI-I
The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable
connector to the VGA port . After you plug the monitor’s cable connector into the VGA port,
gently tighten the cable screws to hold the connector in place.
BIOS Setting
Configure VGA in the Chipset menu (“North Bridge Configuration” submenu) of the BIOS. Refer
to chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to chapter 4 for more information.
VGA
VGA
1
VGA
/
DVI-I
micro HDMI
micro HDMI
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.