DFI CD952 series - Manual (Page 32)

www.dfi .com
32
Chapter 3 BIOS Setup
Chapter 3
PCI Express Root Port 0~3
This section is used to configure the PCI Express Root functions.
Enable/Disable Intel
SpeedStep
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
PCI Express Port 0
Advanced
[Enabled]
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PCI Express Port 0~3
Enable/Disable PCI Express Root Port 0~3.
Boot
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Option ROM Messages
Set display mode for option ROM.
INT19 Trap Response
BIOS reaction on Int19 trapping by option ROM.
Immediate
Execute the trap right away.
Postponed
Execute the trap during legacy boot.
Hard Driver BBS Priorities
Set the order of the legacy devices in this group.
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Boot Confi guration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
CSM16 Module Version
Option ROM Messages
INT19 Trap Response
Driver Option Priorities
Boot Option Priorities
Save & Exit Chipset Advanced Security Main Boot
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
1
[On]
[Disabled]
07.69
[Force BIOS]
[Postponed]