DFI SB630-CRM User Manual
Page 156
156
6
Intel AMT Settings
31. In the TCP/IP Settings menu, select Wired LAN IPV4 Confi guration
then press Enter.
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
<Enabled>
Disabled
Enabled
32. Select Previous Menu until you return to the Intel(R) AMT Confi guration
menu. Select Activate Network Access then press Enter. Type Y then
press Enter.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
< Enabled>
> SOL/ IDER/ KVM
> User Consent
Password Policy <Anytime>
>
Network Setup
Activate Netwok Access
Unconfi gure Network Access <Full Unprovision>
> Remote Setup And Confi guration
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Activiates the current network settings
and opens the ME netwotk interface
Continue: (Y/N)
<ENTER> = Complete Entry [ESC]= Discard Changes
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
Intel(R) Management Engine BIOS Extension v8.0.0.0061/Intel(R) ME v8.0.4.1441
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.