DFI SB630-CRM - Manual (Page 91)

91
3
BIOS Setup
EHCI Controller 1 and EHCI Controller 2
These fi elds are used to enable or disable Enhanced Host Controller Interface
(USB 2.0).
USB Ports Per-Port Disable Control
Control each of the USB ports (0-13) disabling.
USB Port 0 to USB Port 13
Enables or disables the selected USB port.
USB Confi guration
Control the USB EHCI
(USB 2.0) functions. One
EHCI controller must
always be enabled.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
USB Confi guration
EHCI 1
EHCI 2
USB Ports Per-Port Disable Control
USB Port #0 Disable
USB Port #1 Disable
USB Port #2 Disable
USB Port #3 Disable
USB Port #4 Disable
USB Port #5 Disable
USB Port #8 Disable
USB Port #9 Disable
USB Port #10 Disable
USB Port #11 Disable
USB Port #12 Disable
USB Port #13 Disable
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.